type: Double automatic Spray Machine B3

Model B3 double.
For spraying profiled or flat objects
with two edges.
The automatic spray guns are controlled
pneumatically via 2 photocell controls and
time relay.
As standard, the machine is prepared for
6guns, but if required can be prepared
for more.
Unused enamel is collected and re-used.
Extraction air is filtered.
Environmentally-friendly sparying.

 
 
Technical data:
550 m/m
 
Width
800 m/m
Min. speed of conveyer belt
10 m/min
1000 m/m
Max. speed of conveyer belt
120 m/min
1300 m/m
Minimum Height of object
5 m/m
Length of table
4440 m/m
Suction pipe diameter
250 m/m
Total length
4900 m/m
Approx. suction
500 m3/h
Table height
800 m/m
Approx. suction max.
8000 m3/h
Total height of the cabin
1400 m/m
 
Motor: belt
0,75 kw
 

550 mm capable of spraying max. 300 mm capable of spraying max.
Available in:
800 mm capable of spraying max.
550 mm wide objects
1000 mm capable of spraying max.
750 mm wide objects
1300 mm capable of spraying max.
1000 mm wide objects
Purpose:
to spray (large quantities) of long narrow objects in an automatic run-through, spraying
one surface with two edges. Clear lacquer or paint. Wax or stains. U.V or P.U
Objects: panels, slats, floor boards, picture frames, window frames, skirting boards, shelves, furniture
, etc...
Output: sprays carved and flat items with a very high speed in a constant run-through.
Advantages: Used lacquer/paint can be collected and re-used. Very high working speed and even
surfaces. Maintains a clean working environment.
Disadvantages: the mouldings must be lengthwise. Transverse mouldings and carves are not
suitable. A little wastage of lacquer/paint must be expected.
Special for B3:: very easy acces for cleaning. The suction box can be lowered 20 mm and pulled out
from down under the machine. All other parts can be taken apart for cleaning. A drawer under the spray guns catches most
of the lacquer/paint that miss the objects. Usually the lacquer/paint can be collected again for re-use.
Delivery: Normally the machine is delivered without spray guns and pump because most custom
mers have directly contact with a spray gun dealer, or they prefer to "shop" locally to
get a better deal and maintain the warranty. However the machine can also be delivered inclusive of everything.
Function: the conveyer belts have an adjustable speed. There are electronic controlled photocells, which make sure that the pistols
only spray when objects are passing through. A dust filter catches dried up paint, there
fore the suction pipe does not choke. The cabin is provided with windows for checking the work process. 2revolving middle
rollers are included. If the objects are small, it may be necessary to use 1, 2 of
these rollers. Inside the cabin there are installed inlets prepared for high pressure air and
inlets for adjustable spray-air.
Suction: Ventilator for suction 2500 - 4000 m3/h depending of the model is needed, but not
included in the price.
Competitors: there are many, but other machines are quite differently constructed. This model B3
must not be mistaken for Travers-spraying which is a great deal more expensive and
there the guns are moving around.
Sale: Dealers of automatic spray guns are obvious collaboration partners, and so are dealers
of machinery within the wood industry.